9000 Series/Molded SIP Reed Relays

The SIP relay is the industry standard when high reliability and consistent performance are desired in a compact package. The 9001 and 9002 are high performance relays ideally suited for Automatic Test Equipment, Instrumentation, RF and Telecommunications applications. The specification tables allow you to select the appropriate relay for your application.  Download Datasheet

9000 Series Features

  • High Insulation Resistance - 1012Ω minimum (1013Ω typical)
  • High reliability, hermetically sealed contacts for long life (tested up to 1 Billion Operations)
  • High dielectric strength available, consult factory
  • High speed switching compared to electromechanical relays
  • Molded thermoset body on integral lead frame design
  • Coaxial Shield for 50Ω impedance and switching of fast rise time digital pulses - 9002 only
  • Optional Coil Suppression Diode - protects coil drive circuits
  • UL File #E67117, CSA File #028537 - Contact factory for details
  • RoHS compliant


In Inches (Millimeters)
  • 9000 mechanicals
  • 9000 mechanicals
  • 9000 mechanicals


Top View:
Dot stamped on relay refers to pin #1
Grid = .1”x.1” (2.54mm x 2.54mm)

  • 9000 schematic
  • 9000 schematic

1Consult factory for life expectancy at other switching loads. Resistance >0.5Ω defines end of life or failure to open.
2Optional diode is connected to pin #2(+) and pin #3(-). Correct coil polarity must be observed.

Storage Temp: -35°C to +100°C; Operating Temp: -20°C to +85°C; Solder Temp: 270°C max; 10 sec. max
All electrical parameters measured at 25°C unless otherwise specified.
Vibration: 20 G’s to 2000 Hz; Shock: 50 G’s

9000 order info

For RF Graph Performance, see “RF Graphs” section of the “Reed Relay Technical & Application Information”

Coto Technology